Skip to main content

PLANAR Transformers

PLANAR Transformers

What's the PLANAR Transformers?

A planar transformer is essentially a transformer that uses flat windings, usually on a printed circuit board, instead of copper wire to form the coils.  The PCB construction creates a different form factor that offers some unique advantages and a few tradeoffs.

Highly efficient - yet compact - power conversion is fundamental to continued profitable growth of the telecommunications and data processing industries and of many others. Power conversion sub-systems furnish electrical energy in a form needed by these end-use equipments - 50volts DC for telecommunications, 5volts DC or 3volts DC for computers - are but typical examples. For safety reasons, transformers must invariably be incorporated, to galvanically isolate the end equipments from the 230volts or 117volts, 50 or 60 Hz AC mains, as well as to adapt the output voltage to the proper level. In such units, size is directly related to switching frequency, higher frequencies translating into smaller volume, and also into higher efficiency, if the right transformer design is chosen. In the past, operating frequencies much above 20kHz were precluded by the non-availability of suitable switching transistors. Now, with power MOSFETs (Metal-Oxide Semiconductor Field-Effect Transistor) capable of converting power at frequencies well above 200kHz, the major obstacles to ongoing performance improvements in power supplies are the limitations inherent in conventional "wire-wound-on-a-bobbin" transformers and companion inductors.

Benefits Of PLANAR Transformers

Transformers made of the planar principle eliminate virtually all the shortcomings of old-fashioned wire wound types. In a planar design, the windings are made so of copper foil lead frames or printed circuit boards. (a flat copper spirals laminated into thin dielectric substrates). These windings are then sandwiched, along with appropriate insulators, between large area, yet thin, state-of-the-art ferrite cores. This construction technique yields a host of benefits :

  • Typical efficiency 98%
  • Low leakage inductance, typically less than 0.2% for ungapped cores.
  • Low profile, small volume, for high power density equipment designs.
  • Unparalleled working frequency range : 50kHz to 1MHz.
  • Unmatched repeatability and predictability : All windings are pre- tooled.
  • Configurations for all Switchmode Power Supply (SMPS) topologies.
  • Multiple windings available (from one to seven secondaries).
  • 10W - 20kW power ratings.
  • Efficient High cooling
  • High Efficient Heat dissipation and cooling
  • Low weight : 15g per 100W
  • Minimum Electromagnetic Interference (EMI).
  • Wide Operating temperature range : -40°C to +130°C.

Planar magnetics is probably the most cost effective solution for high frequency high power density power conversion equipments available today.

Custom Products

Matching welcomes the opportunity to assist its customers with application-specific designs for a particular application where the requirements can not be met by off-the-shelf components. Our capabilities in design, development, production and testing are extensive. If you are interested in custom products please contact us for assistance.